Product ID:HEAT SHRINKABLE INTERCONNECTIONS WITH (SUPDAT)
MSDS Date:10/01/1994
FSC:3439
NIIN:00N069294
MSDS Number: CBXFK

RAYCHEM CORP

300 CONSTITUTION DR
MENLO PARK, CA 94025
US

Emergency Phone: 202-483-7616;800-424-9300(CHEMTREC)

Info Phone: 415-361-4907

Preparer: DONNA SEID

Cage: 06090

RAYCHEM CORP

MENLO PARK, CA 94025-1164 US

Telephone: 415-361-4907

Cage: 06090

BASE POLYMER MATERIALS (INCLUDING INGS 2-8)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

POLYETHYLENE COPOLYMER

CAS: 9010-77-9

OSHA PEL N/K

ACGIH TLV: N/K

OLEFIN COPOLYMER

OSHA PEL N/K

ACGIH TLV: N/K

FLUOROPOLYMERS

OSHA PEL N/K

ACGIH TLV: N/K

CHLOROPOLYMERS

OSHA PEL N/K

ACGIH TLV: N/K

POLYAMIDES

OSHA PEL N/K

ACGIH TLV: N/K

POLYESTERS

OSHA PEL N/K

ACGIH TLV: N/K

SILICONES

OSHA PEL N/K

ACGIH TLV: N/K

ADHESIVE; (ADHESIVES/MASTICS)

OSHA PEL N/K

ACGIH TLV: N/K

SOLDER (CONSISTING OF ING 11)

OSHA PEL N/K

ACGIH TLV: N/K

METALS

OSHA PEL N/K

ACGIH TLV: N/K

PHOSPHORUS & SULFUR. COMBUST PRODS MAY BE TOX &

RTECS: 9999999ZZ

CASE OF FIRE, DEPENDING ON SOLDER, OXIDE

RTECS: 9999999ZZ

BRTHG DFCLTY DEVELOPS, O*2 SHOULD BE ADMIN BY

RTECS: 9999999ZZ

IMMED BEGIN ARTF RESP. KEEP WARM & QUIET; SEEK

RTECS: 9999999ZZ

IS HEATED TO DECOMP, AS SHOWN BY

RTECS: 9999999ZZ

HEAT-RESISTANT GLOVES ARE REQD IF HOT PRODS ARE

RTECS: 9999999ZZ

FOLLOW APPROP MFR INSTALLATION INSTRUCTIONS &

RTECS: 9999999ZZ

PROPERLY. ENSURE ANY LOC REQS/LEGISLATION

RTECS: 9999999ZZ

USING IR (INFRARED) HEATING DEVICES, OBSERVE

RTECS: 9999999ZZ

IS DANGER OF MOLTEN MATL CONTACTING SKIN. IF IT

RTECS: 9999999ZZ

PRODS, WEAR NATURAL RUBBER GLOVES TO PVNT POSS

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES/SKIN:CNTCT W/MOLTEN MATL
MAY CAUSE THERMAL BURNS. PROD IS NOT EXPECTED TO BE SKIN IRRITANT.
NO HARMFUL EFTS EXPECTED FROM SKIN ABSORPTION. INGEST:HIGHLY
UNLIKELY. THERE IS INSUFFICIENT INFO AVAIL ON MATL TO PREDICT EFTS
FROM INGEST. INHAL:IN COMMON W/MOST ORG MATLS, THERMAL DEGRADATION
& (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: COMBUST BYPRODS MAY BE TOX & SHOULD
NOT BE INHALED. CHRONIC: NOTE:PROD TESTING HAS SHOWN NO EXPOS TO
METAL FUMES FROM SOLDER PRESENT IN PRODS EVEN @ TEMPS WHERE THERMAL
DEGRADATION OF TUBING OCCURS. OVERHEATING PROD TO CHARRING/BURNING
MAY PRDCE VAPS THAT MAY CAUSE EYE, SKIN, NOSE & THROAT IRRIT.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING EYE, SKIN
OR RESPIRATORY DISORDERS (EG ASTHMA CONDITIONS) MAY BE MORE
SUSCEPTIBLE TO THE EFFECTS OF THESE VAPORS.

First Aid:EYES:HOLD EYELIDS APART & FLUSH AFFECTED AREA(S) W/CLEAN
WATER FOR AT LEAST 15 MIN. SEEK MED ATTN. SKIN:AFTER HNDLG, IT IS
GOOD PRACT TO WASH HANDS. IF MOLTEN MATL CNTCTS SKIN, COOL AREA
IMMED IN WATE R. DO NOT ATTEMPT TO REMOVE MATL FROM SKIN. TREAT AS
BURN & SEEK MED ATTN. INGEST:IF SWALLOWED & SYMPS DEVELOP, SEEK MED
ATTN. INHAL:MOVE TO FRESH AIR. IF SYMPS PERSISTS, SEEK MED ATTN. IF
(ING 14)

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM, DRY
POWDER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY EVOLVE IN A FIRE.

Spill Release Procedures:SWEEP UP AND COLLECT IN SUITABLE CONTAINER FOR
DISPOSAL OR REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:FOR PRODS CNTNG THERMOCHROMIC TEMP
INDICATOR, DISCONTINUE HEATING AFTER COLOR CHANGES FROM RED TO
COLORLESS. AVOID ANY VAPS GIVEN OFF IF PROD (ING 16)
Other Precautions:AVOID HEATING PRODS BEYOND TEMPS REQD FOR NORM
INSTALLATION. IF PROD CHARS/BURNS, IMMED STOP HEATING. AVOID INHAL
FUMES WHICH MAY EVOLVE UNDER SUCH CIRCUMSTANCES. ALLOW ANY VAPS TO
DISPERSE & VENT BEF ORE CONTINUING WORK IN AREA. (ING 18)

Respiratory Protection:IF INSTALLATION OCCURS IN A CONFINED,
UNVENTILATED AREA, NIOSH/MSHA APPROVED RESPIRATORS ARE RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING INSTALLATION.
Protective Gloves:HEAT RESISTANT GLOVES IF THERE (ING 21)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 23)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
OSHA, ANSI OR NIOSH GUIDELINES SHOULD BE FOLLOWED.
Work Hygienic Practices:DO NOT CONSUME FOOD, BEVERAGES OR TOBACCO IN
IMMED WORK AREA. WASH HANDS BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:SOLDER FOR HIGH TEMP WIRE. HAZ DECOMP
PRODS:COMBUST BYPRODS DEPEND ON BASE POLYMER USED & MAY INCL BUT
ARE NOT LIMITED TO, CO, CO*2, ALDEHYDES, ACETIC ACID, LOW MW
HYDROCARBS, SILICON DIOXIDE, HYDROGEN CHLORIDE, HYDROGEN FLUORIDE,
HYDROGEN BROMIDE, FLUORO-OLEFINS & OXIDES OF NITROGEN, (ING 12)

Spec Gravity:6-11
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR OR BLUE TRANSPARENT PLASTIC SLEEVES WITH A
RING OF SOLDER INSERT; NO ODOR

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:AT TEMPS HIGHER THAN RECOM FOR PROPER
INSTALLATION, MOST SIGNIFICANTLY IF PROD BURNS, THERMAL DEGRADATION
& (SUPDAT)

Waste Disposal Methods:DISP OF I/A/W ALL LOC, STATE & FED REGS. IF
THERE ARE LOC REGS COVERING CONTROLLED INCIN OF HALOGENATED MATLS,
THEN ALL HALOGEN-CNTNG PRODS WILL BE SUBJECT TO SUCH REGS. REFER TO
PROD LITERATURE FOR I DENTIFICATION OF HALOGEN-CNTNG PRODS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.